This is a further exploration of a firing which has a slow up-fire in
addition to having the usual
Here is another in the series of high titanium glazes, which I'd
called snowflake glazes for
The inlay glaze, oribe-woof-black-M is seen
here.
The matrix glaze, hiAlk_Z3P_M_hAl_lSi, is a cousin of the
glaze seen in the above
The structure of the interaction region is strikingly different as a result of
these shifts in the
The matrix (i.e., background) glaze and inlay glaze overlap minimally before
firing. The width of the
The design is created by adhering a mask and then applying the main
glaze. After drying,
The close-up images were heavily edited to enhance detail. The colors of the
full image of the bowl
400 deg F an hour to 1800 deg F
300 deg F an hour to 2050 deg F
200 deg F an hour to 2220 deg F then a 90 min hold at 2240 deg F
90 deg F an hour to 2320 deg F
300 deg F an hour to 1850 deg F then a 2 hr hold at 1850 deg F
300 deg F an hour to 1750 deg F then a 1 hr hold at 1750 deg F
300 deg F an hour to 1700 deg F then a 3 hr hold at 1700 deg F
25 deg F an hour to 1650 deg F then a 1 hr hold at 1650 deg F
K2O 0.12
Al2O3 0.64
SiO2 3.66
molecular percent Silica 65.6%
K2O 0.10
Al2O3 0.38
SiO2 3.15
molecular percent Silica 68.4%
Added:
5.0% Copper Oxide
This firing features a 'rounded at the top' firing profile; with a hold of an
hour and a half at 100 degreesF
holds on the way down.
the snowflake-like clusters of titanium crystals
that occasionally grow in these glazes.
note, it has higher alumina and silica, and a higher
silica:alumina ratio as well. It is a more
viscous glaze.
chemistry of the inlay glaze. The large titanium crystal
clusters which had been seen in the prior
note are gone. The distinctive
sharply-demarcated band of copper which had diffused into the
matrix glaze is
replaced by a dispersion of particles far into the matrix, but nowhere is it dense.
original inlay varied from an eighth of
an inch to three quarters of an inch.
emulsion wax is applied, the mask is removed and the
open area filled in with a second glaze,
using an ear syringe.
are as they appear in bright light.
Close up Images of the interaction region
Image of the piece
bowl with glaze hiAlk_Z3P_hAl_lSi and inlay glaze oribe-woof-black-M
bowl is ~6 inches in diameter
oxidation firing to a hot cone 10 in an electric kiln
Firing profiles
Up Fire profile hot cone 10
Down Fire Profile hot cone 10
Clay body is a grolleg porcelain from Clay Art Center in Tacoma, WA.
glaze composition
Empirical Formula hiAlk_Z3P_M_hAl_lSi
Na2O 0.50
CaO 0.36
MgO 0.02
P2O5 0.07
TiO2 0.22
Inlay Glaze:
Empirical Formula oribe-woof-black-M
Na2O 0.04
CaO 0.69
MgO 0.17
P2O5 0.01
ZrO2 0.05
0.75% Cobalt Carbonate
Inlay Glaze:
Remarks
below top temperature, and a slow climb
from there to the top temperature.